DRC28 S11
The initial that characterizes the new models for 2020 will be S11.
Following you will find all modifies applied on new 2020 karts develop during the season just ended and confirmed from Victory of the 2019 KZ WORLD CHAMPIONSHIP and the optimal performance in the direct drive’s categories.
Based on the S10 models we have further refined and improved the performance as well as different technical details that improve and simplify the use and management.
C28 S11 Homologation – New international Homologation CIK-FIA 007-CH-92
- Geometry of the frame completely renewed
- New support and support axle bearing
- New Free Line side pods CIK/FIA homologation 007-BS-29
- New Free Line read pods CIK/FIA homologation 007-BR-18
TECH SPECS
| DR-C28 S11 | |
| HOMOLOGATION | CSAI 02 / CH / 14 (extended to 2020) – CIK-FIA 007-CH-92 |
| REAR STABILIZER | OPTIONAL |
| Ø TUBES | 28×2 |
| WHEEL BASE | 950 |
| REAR WIDTH | 595 |
| FRONT WIDTH | 640 |
| LENGTH | 1305 |
| AXLE | 30x5x960 F |
| Ø SPINDLES | D.17 L150 |
| BRAKING SYSTEM | HYDRAULIC "CX" |
| BRAKE POSITION | REAR |
| REAR BRAKE DISC | 150x5 A |
| TANK CAPACITY | 4 LT ca |
| Ø STEERING WHEEL | D. 320 NEW |
| DISK CARRIER | 30 ALL. HQ |
| CROWN CARRIER | 30 ALL. HQ |
| REAR HUBS | 30x50 ALL. HQ |
| WHEELS | CR 115 + DR 150 A |
| PODS (front / side / rear) | KG MK14 / MINI EVO / KG HULK |
DR-AM29Y
Frame with mixed tubes of diameter 28mm and 30mm. The main characteristic of the DR-AM29-Y is the possibility of the wheel base adjustment in the position 1020 – 1030 – 1040mm. This allow an important versatility of this kart to its better adaptability to different categories, especially to the ones with very low power and medium - hard tires.
TECH SPECS
| DR-AM29Y | |
| FRONT STABILIZER | STANDARD |
| REAR STABILIZER | OPTIONAL |
| Ø TUBES | D. 28/30 |
| WHEEL BASE | 1020/1030/1040 |
| REAR WIDTH | 600 |
| FRONT WIDTH | 710 |
| LENGTH | 1510 |
| AXLE | 40X3X1000 F |
| SPINDLE | D. 17 L150 |
| BRAKING SYSTEM | HYDRAULIC 1B |
| BRAKE POSITION | REAR |
| REAR BRAKE DISC | W 66x180x8A |
| TANK CAPACITY | 8,5 LIT CA |
| STEERING WHEEL | D. 320 |
| DISK CARRIER | 40 HQ |
| CROWN CARRIER | 40 HQ |
| FRONT HUBS | 70 HQ |
| REAR HUBS | 40X100 ALL. HQ |
| WHEELS | CR130+DR210 |
| PODS | CIK 12/17 EVO + FP7 FRONT |
All data are subject to tolerances
DR-AR28Y
Compared to the 2017 version, the DR-AR28 has been revised and will have as main characteristic the adjustment of the rear in three different positions. It will have, as series, the new ‘C’ of spindles for housing the eccentric bushing for a better adjustment of camber & caster as in the ‘Racing’ models.
TECH SPECS
| DR-AR28-Y | |
| FRONT STABILIZER | STANDARD |
| REAR STABILIZER | OPTIONAL |
| Ø TUBES | 28 |
| WHEEL BASE | 1010 |
| REAR WIDTH | 580 |
| FRONT WIDTH | 640 |
| LENGTH | 1465 |
| AXLE | 40x3x1000 F |
| BRAKING SYSTEM | HYDRAULIC 1R |
| BRAKE POSITION | REAR |
| REAR BRAKE DISC | W 66x180x8 A |
| TANK CAPACITY | 8,5 LIT CA |
| STEERING WHEEL | D. 320 |
| DISK CARRIER | 40 HQ |
| CROWN CARRIER | 40 HQ |
| REAR HUBS | 40X100 ALL. HQ |
| WHEELS | MAGN. CR130+DR210 |
| PODS | CIK 12/17 EVO + FP7 FRONT |
All data are subject to tolerances